LPG and PNG gas geyser repair

Gas Geyser Repair in Gurgaon

A gas geyser that clicks but will not light, or cuts out halfway through a shower, needs more than a quick fix, because gas has to be handled with care. Shivom Geyser Repair Service offers doorstep gas geyser repair in Gurgaon from our shop in Sector 95, with gas leak and ventilation checks on every visit.

  • LPG cylinder and piped gas (PNG) geysers
  • Leak and ventilation checks on every visit
  • Fault and cost explained before work starts

Smell gas right now? Turn off the gas supply, open the windows, do not touch electrical switches, and leave the area before calling for help.

Technician carrying out gas geyser repair in Gurgaon
Healthy blue LPG gas flame
Gas safety checksOn every repair visit

What we fix

Gas Geyser Problems We Fix in Gurgaon

Gas geysers heat water only while it flows, using a water valve, an ignition system and a burner. When one of them misbehaves, you usually see one of these symptoms. For electric models, see our geyser repair page.

Not Igniting or Only Clicking

Usual cause
Weak batteries, no gas supply, or a worn igniter or electrode.
What we do
Check the ignition circuit, electrode gap and gas flow, then repair.

Flame Goes Out Mid-Shower

Usual cause
Low water flow, a worn diaphragm, a gas pressure drop or a faulty flame sensor.
What we do
Test the water valve, gas pressure and safety sensor.

Yellow or Sooty Flame

Usual cause
A blocked burner or poor air supply causing incomplete burning.
What we do
Clean the burner and check the flue and ventilation. Do not use it until checked.

Water Not Hot Enough

Usual cause
A dirty burner, low gas pressure or a scaled heat exchanger.
What we do
Clean, descale and adjust for a steady temperature.

Water Leakage

Usual cause
A worn water valve diaphragm, loose joints or a heat exchanger leak.
What we do
Trace the leak and replace the seal or part.

Gas Smell Near the Geyser

Usual cause
A leak at the regulator, hose or connections.
What we do
Leak-test every joint and replace the faulty hose, regulator or seal.

Loud Pop When Lighting

Usual cause
Delayed ignition from a dirty burner or a misaligned electrode.
What we do
Clean the burner, reset the electrode and check the gas valve.

Won't Start at Low Pressure

Usual cause
A blocked inlet filter or a stiff water valve diaphragm.
What we do
Clean the filter and service the water valve.
Gas geyser technician in Gurgaon inspecting a wall-mounted unit

How we work

How We Repair Gas Geysers Safely

Every gas geyser repair follows the same safety-first routine, so nothing is taken for granted.

  1. Tell us the symptom

    Call 083687 19253 and tell us what is happening, and whether your geyser runs on an LPG cylinder or piped gas.

  2. Ventilate and isolate

    Windows are opened, and the gas and water supplies are turned off before the cover comes off.

  3. Leak and ignition checks

    Joints are leak-tested, the igniter and electrode are checked, and the burner and heat exchanger are inspected.

  4. Clear explanation

    You are told what has failed, what the repair involves and what it will cost, before any work begins.

  5. Test firing

    The geyser is relit, the flame colour and stability are checked, and all joints are rechecked for gas and water leaks.

Parts and components

Gas Geyser Parts We Repair and Replace

A gas geyser has more moving parts than an electric one. Knowing which part has failed is what makes the repair last.

  • Pulse igniter

    Battery-powered unit that creates the spark.

  • Ignition electrode

    Delivers the spark. Wear or a wrong gap stops lighting.

  • Flame sensor

    Shuts off gas if the flame goes out.

  • Water valve and diaphragm

    Senses water flow and signals the gas to open.

  • Gas valve

    Controls the gas reaching the burner.

  • Burner

    Dirt and soot cause weak or yellow flames.

  • Heat exchanger

    Carries water through the flame. Scale reduces heat.

  • Regulator and hose

    Cracked hoses and worn regulators are a common leak source.

Blue ring of flame from a clean gas burner

LPG, PNG and placement

LPG and PNG Gas Geyser Repair

Whether your geyser runs on a cylinder or your society's gas line, the checks are slightly different. See all options on our geyser services page.

LPG gas appliance with burners
Cylinder supply

LPG Gas Geysers

These run on a cylinder with a regulator and hose. Many ignition and flame problems start with a worn regulator, a cracked hose or an almost-empty cylinder.

Book LPG geyser repair
Piped gas lines on a residential building
Piped natural gas

PNG Gas Geysers

These connect to your society's piped gas line. We check the geyser, its valve and connections. Faults in the supply line itself are handled by your gas distributor.

Book PNG geyser repair
Wall-mounted geyser near a washbasin
Safer placement

Placement and Ventilation

If your gas geyser is fitted inside a closed bathroom or its flue is blocked, our technician can advise on safer placement and ventilation.

About geyser installation
Bathroom where gas geyser ventilation matters

Gas safety

Gas Geyser Safety Every Household Should Know

Most gas geyser problems are simple to fix. A few are safety issues that should never be ignored.

If you smell gas

  1. Turn off the regulator or gas supply valve
  2. Open doors and windows
  3. Do not switch lights, fans or appliances on or off
  4. Do not light a match or use the geyser
  5. Leave the area and call your gas distributor's emergency line

Signs of poor burning

  • Yellow, orange or flickering flame
  • Soot marks around the geyser
  • Headache, dizziness or nausea while bathing
  • A stuffy bathroom while the geyser runs

Carbon monoxide has no smell. If anyone feels unwell while the geyser is running, switch it off, get to fresh air straight away and seek medical help.

Why homeowners call us

Why Choose Us for Gas Geyser Repair

With gas, how the work is done matters as much as the repair itself. Learn more about us or read our geyser care guides.

  • Safety first

    Leak and ventilation checks are part of every gas geyser visit.

  • Local technician

    Our shop is in Sector 95, Vihar, close to the homes we serve.

  • Everything explained

    The fault, the repair and the cost are discussed with you before we start.

  • Honest limits

    If the fault is in the gas supply rather than the geyser, we tell you to contact your distributor instead of guessing.

Local gas geyser technician in Gurgaon checking pipe connections

Service areas

Gas Geyser Repair Near You in Gurugram

Searching for "gas geyser repair near me"? We repair gas geysers from our shop in Sector 95 and in nearby residential areas of Gurgaon. Tell us your sector or society and we will confirm a visit.

  • Sector 95
  • Nearby sectors
  • New Gurgaon
  • Dwarka Expressway area
  • Manesar

Service availability may vary by location.

Shivom Geyser Repair ServiceShop No. 25, Sector 95, Vihar, Gurugram, Haryana 122505

Book a repair

Request a Gas Geyser Repair Visit

Tell us your sector or society, whether it is an LPG or PNG geyser and what it is doing. We will get back to you to discuss the problem and arrange a visit.

  • Mention LPG or PNG, and the geyser brand if you know it
  • Describe the flame, any noise, smell or leak
  • For urgent problems, calling 083687 19253 is faster

Send Your Request

Fill in the form and we will respond to discuss your gas geyser repair.

    Prefer to talk? Call us and describe the gas geyser problem.

    Call 083687 19253

    Questions

    Gas Geyser Repair FAQs

    Clear answers to common questions about gas geyser problems and repair in Gurgaon.

    Gas burners of a household appliance

    Why is my gas geyser not igniting?

    The most common causes are weak batteries in the ignition unit, the gas supply being off or low, or a worn igniter or electrode. If fresh batteries and an open gas supply do not solve it, the ignition system needs to be checked by a technician.

    Why does my gas geyser switch off during a shower?

    It usually happens when water flow drops, the water valve diaphragm is worn, gas pressure falls, or the flame sensor is faulty. A technician can test each of these safely.

    Is a yellow flame in a gas geyser dangerous?

    A yellow or sooty flame points to incomplete burning, which can produce carbon monoxide. Stop using the geyser, ventilate the room and have it inspected before using it again.

    What should I do if I smell gas near my geyser?

    Turn off the gas supply, open doors and windows, and do not operate electrical switches or use any flame. Leave the area, contact your gas distributor's emergency helpline, then call us to arrange an inspection.

    Can a gas geyser be installed inside a bathroom?

    A gas geyser needs good ventilation to burn safely. It is safer installed outside the bathroom or in a well-ventilated spot with the flue venting outdoors. Our technician can check your current setup.

    Do you repair both LPG and PNG gas geysers?

    Yes. We repair gas geysers that run on LPG cylinders and on piped natural gas (PNG). Faults in the society's gas supply itself are handled by your gas distributor.

    How much does gas geyser repair cost in Gurgaon?

    It depends on the fault and any parts needed. Our technician inspects the geyser first and explains the repair and its cost before starting any work.

    Gas Geyser Giving Trouble? Get It Checked Safely.

    Tell us what your gas geyser is doing and where you are in Gurgaon. We will explain the likely fault and arrange a repair visit.