New Geyser Installation
For new flats, renovated bathrooms or a first geyser. We fit it securely and connect it to the water line and a suitable power point.
- Wall mounting and levelling
- Safety valve and connections
New, replacement and shifting
Geyser Installation Services in Gurgaon
A geyser is only as safe as the way it is fitted. Whether you have a new geyser for a new flat, are replacing an old one, or moving it to another bathroom, Shivom Geyser Repair Service installs it properly: strong mounting, a working safety valve, sealed connections and a checked power point.
- Electric storage, instant and gas geysers
- Wall, water and power point checked before fitting
- Filled, test-run and leak-checked before handover
Fitted the right wayFrom Sector 95, Gurugram
What we install
Our Geyser Installation Services
From a first geyser in a new flat to correcting one that was fitted badly, here is how we can help. Broken geyser instead? See our geyser repair page.
Geyser Replacement
We safely remove the old geyser and install the new one, replacing worn connectors and valves rather than reusing them.
- Drain and remove the old unit
- Fresh fittings where needed
Shifting and Reinstallation
Moving house or renovating? We dismount your geyser, then reinstall it at the new location with proper connections.
- Careful dismounting
- Reinstallation and test run
Instant Geyser Installation
Compact geysers for kitchens and small bathrooms. Because they draw high power, we check the socket and wiring are suitable first.
- Power point suitability check
- Neat, close-to-tap fitting
Gas Geyser Installation
LPG and PNG gas geysers need good ventilation and leak-free connections. We advise on the safest placement before fitting.
- Ventilation and flue check
- Gas joints leak-tested
Installation Check and Correction
Geyser fitted by someone else and something feels wrong? We inspect it and correct missing valves, loose brackets or poor wiring.
- Safety and earthing review
- Fix what is not up to standard
Our installation checklist
What a Proper Geyser Installation Includes
A geyser can look fine on the wall and still be unsafe. These are the checks that separate a proper installation from a quick fitting.
Wall strength check
A full tank is heavy. The wall and fasteners must carry it safely.
Level, secure mounting
Fitted straight, with room around it for servicing.
Pressure release valve
Fitted on the inlet so excess pressure can escape safely.
Sealed connections
Inlet and outlet joints sealed to prevent drips.
Power point and earthing
A suitably rated socket with a working earth connection.
Isolation valve
So water to the geyser can be shut off for servicing.
Fill before power
The tank is filled and air released before switching on.
Test run and leak check
Heating confirmed and every joint checked before we leave.
How it works
Our Geyser Installation Process
Five clear steps from your first call to hot water in the bathroom.
- 1
Share the details
Call 083687 19253 and tell us the geyser type and capacity, where it is going, and whether water and power points already exist.
- 2
Site check
The technician checks the wall, water line, power point, space around the geyser and, for gas geysers, ventilation.
- 3
Clear explanation
You are told what the installation involves, any extra fittings needed and the cost, before work begins.
- 4
Installation
The geyser is mounted, the safety valve fitted, and the water and power connections made and sealed.
- 5
Fill, test and hand over
The tank is filled, the geyser test-run and every joint checked. We also show you where to switch off water and power.
Every type of geyser
Storage, Instant and Gas Geyser Installation
Each type has different installation needs. Knowing them avoids problems later. Not sure which to buy? Read our geyser guides.
Electric storage
Storage Geyser Installation
The most common bathroom geyser. A full tank is heavy, so wall strength, the right fasteners and a working pressure release valve matter most.
Book storage geyser fitting
Electric instant
Instant Geyser Installation
Light and compact, but high on wattage. It is best placed close to the tap it serves, on a socket and wiring rated for its load.
Book instant geyser fitting
LPG and PNG
Gas Geyser Installation
Needs good ventilation, so it is safer outside a closed bathroom with the flue venting outdoors. All gas joints are leak-tested after fitting.
Gas geyser safety and repair
Good to know
Before Installation, and Mistakes We Often Correct
A little preparation makes the visit quicker. And if your geyser was fitted in a hurry, check it against the list on the right.
Keep ready for the visit
- The geyser and the fittings kit that came with it
- Clear access to the wall where it will go
- A nearby switched power point, if one exists
- Know where your main water valve is
Common installation mistakes
- No pressure release valve, or a blocked one
- No proper earth connection
- Weak wall plugs or loose brackets
- Switched on before the tank was filled
- Gas geyser fitted inside a closed bathroom
Never switch on an electric geyser before it is full of water. An empty geyser can burn out its heating element very quickly.
Why homeowners choose us
Why Choose Us for Geyser Installation in Gurgaon
We repair geysers every day, so we know which installation shortcuts lead to breakdowns later, and we avoid them. Learn more about us.
Repair know-how
Installed with the eye of someone who sees what goes wrong with badly fitted geysers.
Local and nearby
Based in Sector 95, Vihar, so follow-up help is close by.
Clear before we start
Extra fittings and cost are explained before the installation begins.
Neat finish
Tidy pipework, sealed joints and the area cleaned before we leave.
Service areas
Geyser Installation Near You in Gurugram
Moved into a new flat in New Gurgaon or along the Dwarka Expressway? If you are searching for "geyser installation near me", we install geysers from our shop in Sector 95 and in nearby residential areas. Call with your sector or society to book.
- Sector 95
- Nearby sectors
- New Gurgaon
- Dwarka Expressway area
- Manesar
Service availability may vary by location.
Shivom Geyser Repair ServiceShop No. 25, Sector 95, Vihar, Gurugram, Haryana 122505
Phone083687 19253
Book an installation
Request a Geyser Installation Visit
Tell us your sector or society, the geyser type and capacity, and where it will be fitted. We will get back to you to discuss the installation and arrange a visit.
- Mention electric, instant or gas, and the capacity
- Say if it is a new fitting, replacement or shifting
- For quick answers, call 083687 19253
Send Your Request
Fill in the form and we will respond to discuss your geyser installation.
Prefer to talk? Call us and tell us about your installation.
Call 083687 19253Questions
Geyser Installation FAQs
What people usually ask before booking a geyser installation in Gurgaon.
How much does geyser installation cost in Gurgaon?
It depends on the geyser type, the wall, and whether new water or power points and extra fittings are needed. Our technician checks the site and explains the cost before starting any work.
How long does geyser installation take?
A standard installation where water and power points already exist can usually be completed in a single visit. Extra plumbing or electrical work can take longer.
Do I need to buy the geyser before booking installation?
Usually you buy the geyser of your choice and we install it. If you are unsure which type or capacity suits your bathroom, ask us before buying.
Can you shift my geyser to a new home or bathroom?
Yes. We dismount your existing geyser and reinstall it at the new location, replacing connectors or valves where needed.
Do you install gas geysers?
Yes. We install LPG and PNG gas geysers. Because they need good ventilation, we advise on the safest placement and leak-test all gas joints after fitting.
Why must a geyser be filled before it is switched on?
An electric geyser's heating element must be covered with water. Switching on an empty geyser can burn out the element very quickly, so the tank is filled and air released before the power is turned on.
Will a third-party installation affect my geyser's warranty?
Some manufacturers link warranty terms to installation by their authorised service network. Check your geyser's warranty card before booking, and ask us if you are unsure.
New Geyser? Get It Installed the Right Way.
Tell us the geyser type and where it is going. We will check the site, explain the installation and fit it safely.